15 Foot (4.7m) Aluminum Jon Boat Plans

470 cm x 200 cm – Aluminium Jon Boat – CNC Plans

  • Hull length: 4.70 m
  • Hull width: 2.00 m
  • Water line length: 4.29 m
  • water line width: 1.74 m
  • Draft waterline: 14 cm
  • Displacement: 632 kg
  • Crew: max 4 people
  • Design category “C”
  • Transom inclination angle 12 degrees
  • Transom height 508mm (foot “L”)
  • Outboard engine: max 50 KM
  • Hull weight: 324 kg
  • Airtight displacement chambers – 730 liters in total
    • Chamber in the floor
    • Bow compartment
    • 2 compartments on the sides

Special buildings offering comfortable fishing:

  • 10 closed lockers:
    • locker No. 1 – capacity 100 liters with a hatch with dimensions of 400 x 300 x 75mm
    • locker No. 2 – locker for the fuel tank 140 liters with an enlarged hatch with dimensions of 300 x 600 x 200mm
    • locker no. 3 – for live fish with a capacity of 100 liters – with a pump that exchanges water in a hatch with dimensions of 500 x 300mm – locker with an independent fresh water supply and two overflow outlets.
    • locker No. 4 – locker with a capacity of about 40 liters with a hatch with dimensions of 200 x 300 x 75mm
    • locker No. 5 – locker with a capacity of about 70 liters with a hatch with dimensions of 400 x 300 x 75mm
    • locker No. 6 – locker with a capacity of about 75 liters with a hatch with dimensions of 600 x 150 x 75 mm
    • locker no.7 – locker with a capacity of about 75 liters with a hatch with dimensions of 600 x 150 x 75 mm
    • locker No. 8 – large locker from the bow with a capacity of about 290 liters with a hatch with dimensions of 300 x 600 x 75 mm
    • locker no. 9 – (two independent hatches) – locker for rods, dimensions 2100 x 230 x 365 height – capacity 175 liters, two independent hatches for the same locker, dimensions 600 x 150 x 75 mm
    • locker No. 10 (anchor) – a 115-liter anchor locker (with water drain) hidden in the bow with a large characteristic hatch with dimensions of a hatch with dimensions of 490 x 185 x 450 x 265mm
Bulding method: "welding aluminium"

CNC – Cutting Files and manual of assembly – 375 €


KIT – Cut parts for the boat – on request


Complete boat – on request.